Additives and functional resins for coatings and inks
New energy, semiconductor additives
XOANONS®Substrate wetting agent
Used for preparing water-based membrane coatings and carbon coated aluminum foil slurries, significantly reducing surface tension and improving substrate wetting and leveling
Model number
XOANONS®LD 1710
Materialization index
Item |
Index |
Component |
Polyether-modified polysiloxane copolymer |
Appearance |
Colorless to slightly yellowish transparent liquid |
Active content |
100% |
Density |
0.98-1.02 g/ml (25±1)℃ |
Viscosity |
7-24s (Tu-4 cup)(25±0.2)℃ |
pH |
6-9 |
Refractive index |
1.430-1.434% |
Note: This indicator only represents the typical results, and is not regarded as a specification, mainly with specific COA.
Application area
Water-based system
Key property
?It can strongly reduce the surface tension of water-based systems, has excellent wetting and spreading ability, and prevents the formation of shrinkage pores.
?Low foaming ability.
?Assist in leveling the slurry on porous polyolefin membranes and rapid defect free coating of negative electrode slurry on copper foils.
System |
addition,% |
Surface tension,dyn/cm |
Deionized water |
0.1% |
23.2 |
Acrylic lotion |
0.8% |
31.889 |
Acrylic lotion |
1.0% |
30.667 |
Acrylic lotion |
1.2% |
30.722 |
Note: The above table shows Surface tension data of XOANONS ® LD1710 in water and acrylic lotion.
Incorporation
Add Dispersant LD1710 to the solvent, stir evenly, and then add the powder according to the formula to disperse and grind together.
Suggested addition
Addition amount to total: 0.1-1.5%
Storage stability
Seal and store away from light. Unopened in the original package for 24 months. Products beyond the storage period can continue to be used after passing the inspection. The container is not fully used and unprecedented, and must be closed immediately after use.
Package
25kg(plastic drum)
Go
Top